BÖHLER K600
BÖHLER K600 corresponds to the material 1.2767 (45NiCrMo16). With its high nickel content, this material offers a very good combination of through hardenability and toughness. This results in a high resistance to impact and shock loads. BÖHLER K600 is used for a wide range of tools where high toughness is required. The material is used for forming and bending tools, cold shear blades for thick materials and for reinforcement rings. Due to its good polishability, BÖHLER K600 is also used for embossing tools, plastic molds and mold inserts for injection molding.
Available Product Shapes
Long Products: ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).
Melting Route
Airmelted
Property Features
- Toughness & Ductility: very high
- Dimensional stability: good
Technical Specifications
Material Numbers
- SEL
- 1.2767
- EN
- 45NiCrMo16
- JIS
- SKT6
Standards
- EN ISO
- 4957
Chemical Composition
* Chemical Composition (Average %)
- C
- 0.48
- Si
- 0.23
- Mn
- 0.40
- Cr
- 1.30
- Mo
- 0.25
- Ni
- 4.00